 |
|
|
 |
How does dynamic collision monitoring work?
If, for example, during setup the operator presses the wrong axis key and moves the table in the wrong direction, the control monitors the movement and shows an error message if collision threatens.
Dynamic Collision Monitoring Option (DCM)
The DCM monitors the working space of the machine for possible collisions with machine components. The movements of swivel heads and tilted tables are also taken into account. If two objects monitored for collision come within a defined distance of each other, the DCM outputs an error message. The dynamic collision monitoring is active in both the manual operating modes as well as the machine operating modes, and is indicated by a symbol in the operating mode display.
Since the axis traverse speeds of NC machining operations continue to increase, and movements in 5 axes are very difficult to predict, collision monitoring is a useful function for relieving the machine operator and avoiding damage to the machine.
Source: http://www.heidenhain.de
 |
|
| HARTFORD |
MAKYNO |
 |
 |
| OKUMA |
DMG |
 |
 |
| MORISEIKI |
MAZAK |
 |
 |
|
|
|
 |
AUGUST
17-18
SouthMac
Christchurch, New Zealand
By Dealer |
SEPTEMBER
7-9
Metmash.Machine-tool
(18m2)
Rostov, Russia
By Dealer |
12-16
INTERMACH
JoinVille, Brazil
By Dealer |
13-15
Metal-Working Fastening
Instruments (20m2)
Yekaterinburg, Russia
By Dealer |
19-24
EMO 2011
Hannover, German
(See us in EMO)
By Dealer |
21-24
Linkage Metalworking 2011
SECC, Vietnam
By Dealer |
28-10/1
KOMAF (KINTEX)
KINTEX SEOUL, Korea
By Dealer |
OCTOBER
3-8
DIAMTS 2011
COBO CENTER, USA
By Dealer |
5-8
2011 METALWORKING WORKING TOOLS & HARDWARE PHILIPPINES
Pasay City, SMX, Philippines
By Dealer |
11 -14
Industrial Show 2011 (28m2)
Samara, Russia
By Dealer
|
18 -21
MERCOPAR
Caxias do Sul, Brazil
By Dealer |
31 -11/3
MASHEX-2011 (99m2)
Moscow, Russia
By Dealer |
NOVEMBER
16-19
DMP 2011
Dongguan City, HK
By Dealer |
30-12/3
PAMERINDO
Jakarta, Indonesia
By Dealer |
|
 |
|