|
|
| Table |
HCMC-15 |
HCMC-18 |
| Working surface |
1650x820 mm |
2000x920 mm |
| T slot(size x number x pitch) |
18 x 7 x 120 mm |
18 x 7 x 120 mm |
| Max. table load |
2200kgs |
3000kgs |
| Travel |
|
|
| Longitudinal travel (X-Axis) |
1500 mm |
1800 mm |
| Cross travel (Y-Axis) |
820 mm |
920 mm |
| Vertical travel (Z-Axis) |
700 /820 (opt.) mm |
700 /820 (opt.) mm |
| Distance from spindle end to table |
150~850 /200~1020(opt.) mm |
180~880 /80~1000(opt.)mm |
| Distance from spindle center to column |
900 mm |
1,025 mm |
| Spindle |
|
| Spindle nose taper |
#50 |
| Spindle speed (Direct type) |
10,000 R.P.M. (opt.) |
| Spindle speed (Gear type) |
50~4000 R.P.M. (6000 opt.) |
| Spindle speed (Pull type) |
50~6000 R.P.M. (8000 opt.) |
| Feedrate |
|
| Cutting feedrate (X,Y, Z axis) |
1~7000 mm/min |
| Rapid traverse rate (X,Y,Z axis) |
15,000 mm |
| ATC |
|
| Tool changer type |
Random |
| Max. tool weight kgs. |
15 kgs |
| Max. tool size (dia. x length) |
125 x 300 mm |
| Tool shank |
BT-50 /CAT-50 |
| Pull stud bolt |
P50T-1 |
| Motor |
|
| Spindle drive motor |
15/20 KW/HP (26/35 KW/HP Ot.) |
| X, Y, Z axis drive motor (Fanuc) |
4.0 kw |
x: 40, Y,Z: 7.0 kw |
| X, Y, Z axis drive motor (milsubishi) |
3.5 kw |
x:3.5, Y,Z: 4.5 kw |
| X, Y, Z axis drive motor (Heidenhain) |
9.6 kw |
9.9 kw |
| Other |
|
| Required air pressure |
6.5 kg/ cm2 |
| Electric power consumption |
45 kw |
| Floor space (full guarding) |
5260x5150x3308 mm |
6470x5290x3130 mm |
