Languages

 
 

 
High Efficiency Production Machiing Center
  Print
 

VW-5340
5200x2100 mm
 
My status
MODEL UNIT VW-5340
Table
Working surface mm 5200x2100
T-slot (size x number x pitch) mm 28x9x220
Max.table load kgs 16000
Travel
Longitudinal travel (X -axis) mm 5050
Cross travel (Y -axis) mm 3400
Vertical travel (Z -axis) mm 700
Vertical travel (W -axis) mm 1100
Distance from spindle end to table mm 0-1800
Width between column mm 2500
Spindle
Spindle nose taper   #50
Spindle speed (Gearshift) r.p.m
50-4000(ST) , 50-6000(OP)
Feed
Cutting feed rate (X,Y,Z axis) mm/min 1-6000
Rapid traverse(X axis linear way)   X=10000
Rapid traverse (Y,Z,W axis linear way) mm/min
Y=15,000, Z=12,000, W=3,000
Atc
Max.tool weight kgs
20
Max.tool size (diameter x length) mm
200x400L
Tool shank  
MAS BT50 / CAT50
Pull stud  
MAS P50T-1
Motors
Spindle drive motor kw(hp)
\ 22;26 / 35
X,Y.Z,W axis drive motor kw(hp)
X,Y-9 (12), Z=7 (9.4), W=7 (9.4)*2

 
  • Cooling system
  • Centralized automatic lubrication system
  • Air blast through spindle
  • Spindle oil cooler
  • Screw type ship conveyor and flushing device
  • Link type chip conveyor and portable chip bucket
  • Fluorescent light
  • Semi-splash guard
  • Automatic power off
  • Operation finish lamp
  • Foot switch for spindle clamp / unclamp
  • Remote manual pulse generator
  • RS-232 Interface
  • Leveling bolts and blocks
  • Adjusting bolt and blocks
  • Adjusting tools and box
  • Operation manual & electric drawing equipment
  • Convection heat exchanger in control box
  • Table side air blast
  • Oil fluid separator
    		•   
  • Full splash guard
  • Auto tool length measurement
  • Imitative mold cutting system
  • Linear scales
  • Coolant gun
  • Air gun
  • DNC software
  • 90° Angular head
  • 30° Angular head

    •  

     
    Germany – Dusseldorf
    Metav, Düsseldorf
    2010/2/23-27
    Germany – Stuttgart
    Spring open house
    2010/3/
    Brazil – Joinville
    FMU
    2010/3/2-5
    Mexico – Monterrey
    Expo Manufactura 2010
    2010/3/2-4
    Holland - Utrecht
    TechniShow in Utrecht
    2010/3/9-12
    Brazil - SAO PAULO
    TCHMEI Exhibition
    2010/3/15-18
    India - Mumbai
    Die & Mould 2010
    2010/3/18-21
    France – Paris
    FA.DIST
    2010/3/22-26
    Poland – Poznan
    New Exhibition (STOM FAIR)
    2010/3/23-26
    Germany – Dusseldorf
    METAV 2010
    2010/3/23-27
    Russia – KAZAN
    MACHINE TOOLS. DEVICE TOOLS 2010
    2010/3/30-4/2
    Chile – Santiago
    EXPOMIN 2010
    2010/4/12-16
    Brazil – Novo Hamburgo
    FIMEC
    2010/4/13-16
    Korea – Seoul
    KIMTEX SIMTOS 2010
    2010/4/13-18
    New Zealand – Wellington
    Emex 2010
    2010/5/4-16
    Malaysia – KL
    EMTM 2010 METALTECH
    2010/5/5-9
    Malaysia - KL
    MTM 2010 METALTECH
    2010/5/6-10
    Australia - Sydney
    Austech exhibition 2010
    2010/5/11-14
    Brazil - SÃO PAULO
    MECANICA – ANHEMBI
    2010/5/11-15
    Turkey – Konya
    KONMAK 2010
    2010/5/13-16
    Russia – MOSCOW
    METALLOOBROBOTKA - TECHNOFORUM 2010
    2010/5/24-28
    Indonesia – Surabaya
    Machine Tools Surabaya
    2010/6/2-5
    UK – BIRMINGHAM
    MACH 2010
    2010/6/7-11
    Poland – POZNAN
    MACHTOOL FAIR
    2010/6/8-11
    India - Chennai
    ACMEE
    2010/6/17-21
    TURKEY - Istanbul
    TATEF 2010
    2010/10/12-17
    Eygpt - Cairo
    Mactech exhibitoin 2010
    2010/11/25-28
     

    		SHE HONG INDUSTRIAL CO. LTD
    No.6,6th Rd. Taichung Industrial Park. TAICHUNG, 40755, TAIWAN.
    TEL: + 886-4-2359-2747 FAX: + 886-4-2358-1793; 886-4-2350-3443
    After sales direct line: +886-4-2359-1921
    Copyright © SHE HONG INDUSTRIAL CO. LTD. Hosted by Machinetools Directory , Plastic and Rubber Machine Directory.