Advantage
|
TGV-65 gantry type construction +Four linear guideways on Y axis with drive through gravity enhance stable and dependable moving rigidity. +The machine is available to be loaded into a HQ container for saving freight costs and reassembling of parts. +The machine design meets the human engineering principles that allow the operator to load and unload workpieces with ease. +High efficient chip removal: As there is no obstruction between the workpiece and machining area, chips are quickly evacuated through chip removing channel. This design prevents the machine from thermal deformation caused by heat accumulated chips. +Three-axis overlap design so the impact on three-axis positioning accuracy is minimized. |
|
TGV-128/1612 high speed bridge type construction +The special design of great span between Y-axis linear guideways drastically increases structural rigidity and resist heavy cutting load. +With the additional pin on the bearing houseing, higher transmission rigidity can be achieved. +With thermal symmetry and heat isolation design, the heat thermal can be isolated to 97%. +With the use of toplogy to conduct an optimum structural analysis, a light-weight structure can be achieved.
|
![]() |
|
i-Tech spindle(opt)
+Exclusive smart functions for self-designed and manufactured high speed 24,000rpm spindle is available to integrate various smart functions such as i-Diagnosis, i-Compensation, i-Balance and i-Protections that provide safety protection of spindle, increase the spindle accuracy and reduce down time.
Static rigidity and structure analysis +Static rigidity and machine structure are analyzed by ANSYS to confirm structure design quality and safety for optimum performance. Roller type linear guideways on 3 axes +The linear contact between the rolling body of the roller and the sliding block causes a tiny elastic deformation under a high load condition. This makes high accuracy, heavy load resistance and lifespan possible. Thermal growth control on 3 axes(opt) +The parts in 3-axis feed system, such as the motor base, ballscrews, nuts and bearing are completely cooled to remove thermal deformation while ensuring the positioning accuracy of the machine(Features may vary by model).
|
Specification
- Machine Model
- TGV-65
- Table
-
Working surface
750x620 (29.53x24.41)
mm (inch)
Max. table load
500 (1102.31)
kg (lbs.)
- Travel
-
Longitudinal travel(X-axis)
660 (25.98)
mm (inch)
Cross travel(Y-axis)
550 (21.65)
mm (inch)
Vertical travel(Z-axis)
460 (18.11)
mm (inch)
- Spindle
-
Spindle nose taper
ISO40, HSK-A63(20/24K only)
Spindle speed(DDS)
10000 opt.12000/15000/20000
rpm
Spindle speed(Built-in)
opt. 24000
rpm
- Feed
-
Rapid traverse rate(X/Y/Z)
30/30/30 (1181.1/1181.1/1181.1)
m/min (ipm)
- ATC
-
Tool storage
A:24 opt. 30/40/60
pcs
- Machine Model
- TGV-128
- Table
-
Working surface
1300x850 (51.18x33.46)
mm (inch)
Max. table load
2500 (5511.56)
kg (lbs.)
- Travel
-
Longitudinal travel(X-axis)
1200 (47.24)
mm (inch)
Cross travel(Y-axis)
800 (31.5)
mm (inch)
Vertical travel(Z-axis)
700 (27.56)
mm (inch)
- Spindle
-
Spindle nose taper
ISO40, HSK-A63
Spindle speed(DDS)
#40:10000 opt.15000/20000
rpm
Spindle speed(Built-in)
#40: opt: 24000
rpm
- Feed
-
Rapid traverse rate(X/Y/Z)
30/30/30 (1181.1/1181.1/1181.1)
m/min (ipm)
- ATC
-
Tool storage
16 opt. 24/32/40
pcs
- Machine Model
- TGV-1612
- Table
-
Working surface
1800x1300 (70.87x51.18)
mm (inch)
Max. table load
4000 (8818.49)
kg (lbs.)
- Travel
-
Longitudinal travel(X-axis)
1600 (62.99)
mm (inch)
Cross travel(Y-axis)
1200 (47.24)
mm (inch)
Vertical travel(Z-axis)
700 (27.56)
mm (inch)
- Spindle
-
Spindle nose taper
ISO40/HSK-A63/ISO50
Spindle speed(DDS)
#40: 10000 opt. 15000/20000
rpm
Spindle speed(Built-in)
opt. #40: 24000, #50: 12000
rpm
- Feed
-
Rapid traverse rate(X/Y/Z)
30/30/30 (1181.1/1181.1/1181.1)
m/min (ipm)
- ATC
-
Tool storage
16 opt. 24/32/40
pcs