Logout?
Log Out
Are you sure to log out ?
Double Column Machining Center (Linear guideway
Intelligent, High-efficiency & Excellent precision
More comprehensive functions provide you perfect solutions
One & only :
The application of AI technology makes the accuracy not affected by environmental factors, so that it can achieve high-precision machining under the room temperature and the machining efficiency is not affected by the weight of the workpiece and tool wear, as long as it is equipped with Apps developed by Hartford.
Activate the mobile application feature to immediately access various information about the machine.
One Button Tuning, it can eliminate vibration and improve machining accuracy
Monitoring the live view inside the machine through IP CAMERA
Short the time to select tool and improve the cutting efficiency
Turn on ECO mode, the oil cooler will turn off when idle, helping to save energy by 40%
Save power consumption of chip conveyor motor, also remove mass chips according to the spindle current
1. Z-axis four linear guideways three binding structure patented technology, two-way support provides 20% rigidity while cutting, bring you excellent performance.
2. Multiple choice of spindle , ex. DDS, gear head 8000 rpm
3. Self-made spindle, deflection within 5μm.
Slant beam design
X-axis three linear guideways
1.The new slant beam design, effectively reduces vibration, enhance accuracy and surface sheet cleanliness during cutting.
2. Extra-large columns, the joint width between bottom of the column and the base increased to 1,250mm, effectively reduce overall vibration from cutting.
3. X-axis three linear guideways design for HSA-x28/x32/x36 series, and two guideway design for HSA-x23/x27/x212 series.
The X-axis three linear guideways design can be used to resist process rotation torsion and enhance rigidity by more than 50%. Moreover, the max. load of a workbench can be 30,000 kgs, thus allowing you to meet your processing needs and help you reach your accuracy and quality requirements.
Ballscrew support mechanism
3-axes direct drive
1. 3-axes direct drive servo motor: effectively reducing the transmission backlash by more than
30%.
2. Z axis nitrogen counterweight design: reduce the operating noise of the hydraulic tank,
reduce the oil temperature by 50%, and effectively save energy by more than 20%.
3. With Ballscrew support, it can improve screw dead weight sagging and enhance the
positioning accuracy & life of screw.
X axis Ballscrew support, it is standard configuration for model above 5 meters and below 4
meters is optional configuration.
Y axis Ballscrew support, it is standard configuration for HSA-x36 series and option for
HSA-x23/x27/x28 series.
Face milling
Side milling
Tapping
Drilling
1. Decades of machine tool manufacturing technology, plus new developed AI technology, makes the machining accuracy/efficiency/finish almost equal to the level of Japanese machines
2. “Super Speed Cycle time” makes cutting efficiency 15% ~ 50% higher than Taiwanese peers
．Model：HSA-427
．Spindle：6,000 rpm gear head, 26kw
．Material：S45C
Tolerance of 3D contouring accuracy conforms to the standard:
Result of 114 spots test is approved within tolerance (± 0.02mm).
OMV (On Machine Verification): 3D Inspection is directly employed based on OMV system, which ensures each workpiece is qualified, and efficiency is enhanced to reduce time on workpiece upload/load on the table.
Worktable size
4000 x 2200
mm
Max. load (Average)
12000
kg
X axis travel
4000
mm
Y axis travel
2700
mm
Z axis travel
780, opt. 1000 / 1200
mm
Spindle nose taper
#50
Spindle speed (DDS)
10000 / 12000
rpm
Spindle speed (Gear head)
6000 / 8000
rpm
Spindle speed (Built-in)
12000
rpm
Capacity
A: 32 ( 40 / 60 )
pcs
Tool shank
BT-50 ( CAT50 / DIN69871A / BBT50 )
Spindle drive motor (Cont. / 30min)
15 / 18.5 ( opt. 18.5 / 22, 22 / 26, 30 /37 )
kw
