Logout?
Log Out
Are you sure to log out ?
5 Axis Vertical Machining Center ( 4 +1 axis)
5 Axis AI Vertical Machining Center (4+1 axis)
With more comprehensive functions, faster speed and higher precision
One & only :
Accuracy is not affected by environmental factors due to AI Tech application. Efficiency of machining is enhanced as factory ambient temperature remains constantly, and not affected by workpiece weight and the wear of tools. Thanks to automatic operation function, which it is similar to autopilot of Tesla.
Monitoring the live view inside the machine through IP CAMERA
You won't miss the start and end time of alarm message and machining complection
Save your cost up to 50%. Oil lubrication depends on your machining status
With this function, tool finding time is reduced and machining efficiency is increased
23% efficiency increased on Heavy cutting and save cost of tooling
Reduce Environment thermal issue during machining, ensure thermal displacement within 0.03mm while temperature difference within 8℃
High quality self-made spindle
1. High quality self-made spindle to ensure spindle run-out within 5μm.
2. Oil-air lubrication spindle：Spindle bearing is lubricated by lubrication oil, spindle is capable of long term running.
全系列機型軌道面五年保固
1. High rigid structure design: Stable output of machining quality.
2. Unique design on guideways : Providing high precision, high rigidity and high load characteristics.
底座一體式設計
三軸溫升控制
高精密四五軸結構
1. One-piece base design: 100% protective design, providing high-efficiency oil-water separation efficiency.
2. 3-axis thermal deformation treatment (optional): motor base and bearing are equipped with cooling devices, which can effectively improve the machining accuracy by 15%.
3. High-precision 4 & 5 axis: DD motor driven design, with high-resolution, direct rotation measurement system, to achieve long-term stable high-precision machining.
1. Decades of machine tool manufacturing technology, plus new developed AI technology, makes the machining accuracy/efficiency/finish almost equal to the level of Japanese machines
2. “Super Speed Cycle time” makes cutting efficiency 15% ~ 50% higher than Taiwanese peers
．Model：5A-95Q
．Spindle：15,000 rpm DDS spindle 11 kW
．Cutting material：Alumium die cast ADC12
Tolerance of 3D contouring accuracy conforms to the standard:
Result of 114 spots test is approved within tolerance (± 0.02mm).
OMV (On Machine Verification): 3D Inspection is directly employed based on OMV system, which ensures each workpiece is qualified, and efficiency is enhanced to reduce time on workpiece upload/load on the table.
Worktable size
Ø 800
mm
Max. load (Average)
850
kg
T slot Width x Pitch
14 x 100° (7)
mm
X axis travel
950
mm
Y axis travel
850
mm
Z axis travel
650
mm
A axis travel
±120°
degree
C axis travel
360°
degree
Spindle nose taper
#40
Spindle speed (DDS)
10000/12000/15000
rpm
Spindle speed (Built-in)
20000
rpm
Capacity
A : 40 ( 60 / 80 / 120 )
pcs
Tool shank
BT40 (BBT / CAT / DIN / HSK-A63)
Spindle drive motor (Cont. / 30 min)
7.5 / 9.8 opt.10 / 12.5
kW
